Box camera with viewfinder Agfa Clack
Also known as: Boxkamera mit Sucher Agfa Clack
Record status
Individual type · partial
Box camera with viewfinder Agfa Clack is held by Roscheider Hof Open Air Museum. Museum description: Shown here are 3 Agfa Clack cameras, described by the Agfa Kamera Museum - Scholz as follows: The Agfa Clack is also referred to as an iconic camera of the 1950s, although it still belongs to the box cameras.
At the time it was designed as an entry-level model. The principle followed was: where you can adjust little, you can also do little wrong. The shutter has only two exposure times, one M for instant [Moment], approx. 1/30 second, and B for Bulb, for long exposures. One had to hope for a calm subject or use a tripod. With the cable release, the risk of camera shake can be significantly reduced. The Agfa Clack was manufactured from 1954 to 1965.
The earlier models had a metal body, later ones were made of plastic. It is a simple, box-shaped body with a single-element 95 mm meniscus lens with a built-in close-up lens a. The museum record gives measurements L: 110 mm W: 100 mm H: 95 mm. These details come from the holding museum's own record; how far this object represents a wider collectible type has not yet been independently verified.
Evidence at a glance
- Linked sources
- 1
- Photograph views
- 1
- Catalogue references
- 0
Counts describe this entry’s documentation, not authenticity, rarity or completeness. Photographs may show one specimen; check each caption and licence.
Physical characteristics
- Dimensions
- L: 110 mm B:100 mm H: 95 mm
Technical characteristics
- Technique
- Stahl, Kunststoff, Glas (Material/Technik)
Identification
- Europeana id
- /192/item_3RO3ONO5ETK426IFI2S7NU6PGSD3RYKD
- Museum object name
- Boxkamera mit Sucher Agfa Clack
- Holding institution
- Roscheider Hof Open Air Museum
Catalogue references
No catalogue numbers recorded. Numbers are only published once transcribed from a verified edition of a standard catalogue — they are never inferred.
Research required
- Research required: confirm materials, dimensions, maker and wider type against the holding institution and a specialist reference.