Skip to content

Daniel Roth Yellow Gold Monopusher Chronograph

ProbableCredible evidence exists but classification is not fully established.

Record status

Individual type · partial

Period

Circa 1990

This Daniel Roth wristwatch features the maker's signature ellipsocurvex case in 18K yellow gold, measuring 38 mm wide by 41 mm long. Dated by the source to circa 1990, the watch is catalogued as part of a limited edition of 36 yellow gold examples powered by the manual-wind Calibre 2220, based on a vintage Lemania ébauche.

The dial combines a guilloché centre, Roman numerals on a brushed hour ring, two subsidiary dials, and blued steel hands with pointed tips. The bottom dial plaque bears the inscription 'NUMERO 20', matching the source-recorded case and movement number.

Evidence at a glance

Linked sources
1
Photograph views
1
Catalogue references
0

Counts describe this entry’s documentation, not authenticity, rarity or completeness. Photographs may show one specimen; check each caption and licence.

Technical characteristics

Type
Monopusher chronograph wristwatch
Calibre
Manual, Cal 2220
Dimensions
38mm width X 41mm length
Case Number
20
Edition Size
36 pieces
Case Material
18K yellow gold
Place recorded
Switzerland
Maker / attribution
Daniel Roth

Design

Visible features
• Ellipsocurvex yellow gold double-stepped case with straight lugs • Silvered dial featuring textured guilloché centre, brushed chapter ring with black Roman numerals, and two sub-dials • Single chronograph pusher positioned at 2 o'clock above the winding crown • Blued steel hands with pointed tips and central chronograph seconds hand • Plaque at 6 o'clock inscribed 'NUMERO 20' and 'SWISS' printed below the VI marker
Limited Edition Context
This example is one of 36 yellow gold pieces produced as part of a limited edition. The total production for the model is cited as 52 pieces, including 16 platinum examples. The source notes that 10 additional movements were later discovered and cased, distinguishable from the original production models by the presence of a swan-neck regulator.
Mechanism and Provenance
The watch is powered by a manual-wind Calibre 2220, noted as a vintage Lemania 15CHT or 2220 ébauche. The movement and case back are not visible in the provided image. According to the source, the watch was serviced by Daniel Roth in 2017, and the lot includes a repair certificate and an accompanying letter from the maker.
Case and External Construction
The timepiece features an 18K yellow gold ellipsocurvex case, described as double-stepped with straight lugs, measuring 38 mm in width and 41 mm in length. It is equipped with a single chronograph pusher at the 2 o'clock position. The dial includes a guilloché pattern, a brushed chapter ring with Roman numerals, and two sub-dials. A plaque located at the 6 o'clock position is inscribed with 'NUMERO 20', with 'SWISS' printed beneath the VI marker.

Identification

Serial number
20
Source note
Facts transcribed from the linked source listing or collection record. Attribution and specifications are source-reported and have not been independently authenticated.

Catalogue references

No catalogue numbers recorded. Numbers are only published once transcribed from a verified edition of a standard catalogue — they are never inferred.

Research required

  • Research required: Movement and case back are not visible in the supplied photograph
  • Research required: Reference number is not specified in the auction catalogue listing
Can you source one of these? Submit a reference