Omega Chronometer reference 2374/5
Record status
Individual type · partial
Period
circa 1940s
Maker / issuer
OmegaThis Omega wristwatch, identified by reference number 2374/5, is a dress watch featuring a 34 mm stainless steel case with distinct lugs. The watch operates on a Calibre 30.10 automatic movement, which utilizes a bumper rotor system that oscillates between two springs rather than rotating 360 degrees.
The dial is a two-tone silver finish, incorporating a vertically brushed center and a polished outer track, and is devoid of luminous material. It displays applied rose-gold hour indices, the Omega logo, and a subsidiary seconds dial at the six o'clock position. The watch is presented on a leather strap. According to the source, the steel case remains in condition, and the movement has been inspected and adjusted by the dealer's horologist.
The authenticity and condition details are provided by the source.
Evidence at a glance
- Linked sources
- 1
- Photograph views
- 1
- Catalogue references
- 0
Counts describe this entry’s documentation, not authenticity, rarity or completeness. Photographs may show one specimen; check each caption and licence.
Technical characteristics
- Type
- Dress watch
- Calibre
- 30.10
- Reference
- 2374/5
- Date Period
- 1940s
- Case Diameter
- 34 mm
- Case Material
- Stainless steel
- Movement Type
- Bumper automatic
- Place recorded
- Switzerland
- Movement Serial
- 102xxxxx
- Maker / attribution
- Omega
Design
- Movement
- Power is provided by the calibre 30.10 automatic movement, which features a bumper-style winding mechanism. In this system, the rotor oscillates between two limiting springs rather than performing a full 360-degree rotation. The movement is finished with rose gold plating. The movement is identified as a chronometer-rated caliber. The serial number recorded as 102xxxxx indicates that the movement was produced during the mid-1940s.
- Case and Dial
- The watch features a 34 mm diameter case constructed from stainless steel. The design includes distinct, prominent lugs. The case housing provides a frame for the two-tone silver-colored dial, which is constructed without luminous material. The dial layout includes a polished outer edge contrasting with a vertically brushed center section. Applied indices and the Omega logo are rendered in rose gold. A subsidiary seconds indicator is situated in the lower half of the dial, positioned at the 6 o'clock mark.
- Visible features
- • Subsidiary seconds hand located at 6 o'clock position • Rose gold applied indices and Omega branding on dial • Two-tone silver dial finish with vertical brushing in the center • Leather strap with perforation details
- Maintenance and Provenance
- The stainless steel case is described as being in a positive condition. The internal mechanism has undergone an inspection and adjustment process conducted by the collection's horologist. The watch is supplied with a branded leather strap and a handcrafted leather carry case. No records detailing historical part replacements were provided by the source.
Identification
- Reference
- 2374/5
- Serial number
- 102xxxxx
- Source note
- Facts transcribed from the linked source listing or collection record. Attribution and specifications are source-reported and have not been independently authenticated.
Catalogue references
No catalogue numbers recorded. Numbers are only published once transcribed from a verified edition of a standard catalogue — they are never inferred.
Research required
- Research required: No information provided regarding potential historical component replacement
- Research required: Certification of internal condition and authenticity is attributed solely to the source