Skip to content

Rolex Oyster Chronograph Monoblocco Antimagnetic reference 4500

ProbableCredible evidence exists but classification is not fully established.

Record status

Individual type · partial

Period

Vers 1946

Maker / issuer

Rolex

According to the auction catalogue, this Rolex Oyster Chronograph Monoblocco Antimagnetic, reference 4500, dates to circa 1946. It is constructed in an 18-karat yellow gold case measuring 35 mm in diameter, manufactured by Spillmann with hammer-head punch mark 136.

The round case features round chronograph pushers, an original signed screw-down Oyster crown, and a screw-down case back. The patinated silver dial displays applied hour markers, painted minutes, tachymeter and telemeter scales, and two sub-dials: small seconds at 9 o'clock and a 30-minute counter at 3 o'clock. The source reports a manual-wind Calibre 23 movement signed Rolex with a ROW balance bridge engraving, accompanied by a leather strap with a signed gold-plated pin buckle.

Evidence at a glance

Linked sources
1
Photograph views
1
Catalogue references
0

Counts describe this entry’s documentation, not authenticity, rarity or completeness. Photographs may show one specimen; check each caption and licence.

Technical characteristics

Type
Chronograph
Calibre
Calibre 23
Reference
4500
Case Maker
Spillmann (hammer head punch no. 136)
Gross Weight
53.5 g
Case Diameter
35 mm
Case Material
18K yellow gold (750)
Serial Number
418846
Place recorded
Switzerland
Maker / attribution
ROLEX

Design

Visible features
• Two-register chronograph dial configuration with sub-dials at 3 and 9 o'clock. • Round chronograph pushers flank a fluted winding crown on a yellow-gold case. • Dark textured leather strap fitted with a yellow-toned pin buckle bearing a coronet emblem.
Dial Configuration
The watch features a silvered dial exhibiting a uniform mottled patina and minor staining. The layout includes applied hour markers, painted minute tracks, and integrated tachymeter and telemeter scales. Chronograph functionality is presented via a two-register setup: a 30-minute counter positioned at the 3 o'clock mark and a small seconds register at 9 o'clock. The dial is signed and includes the 'Swiss Made' designation.
Case Construction and Identification
This Rolex reference 4500 is identified by the manufacturer as a 'Monoblocco' chronograph, a term applied by the source to models where the bezel is integrated into the case structure. The 35 mm round case is constructed from 18-karat yellow gold (750). Visible features include round chronograph pushers and a signed Rolex Oyster screw-down crown. The case was produced by Spillmann, indicated by the 'hammer head' hallmark 136.
Movement and Reported Specifications
The timepiece is powered by a manual-wind Calibre 23 movement signed by Rolex. The movement is distinguished by a 'ROW' engraving located on the balance bridge. The watch is fitted with a leather strap finished with a signed gold-plated pin buckle. The condition report indicates that the movement and chronograph are functional, but recommends a standard service.

Identification

Reference
4500
Serial number
418846
Source note
Facts transcribed from the linked source listing or collection record. Attribution and specifications are source-reported and have not been independently authenticated.

Catalogue references

No catalogue numbers recorded. Numbers are only published once transcribed from a verified edition of a standard catalogue — they are never inferred.

Research required

  • Research required: Movement caliber and case back interior are not shown in the lot photograph.
  • Research required: Case maker hallmark, reference number, and movement engravings are source-reported and not directly visible.
Can you source one of these? Submit a reference