Wyler Vetta Chronograph, Ref. E3347W
Record status
Individual type · partial
Period
circa 1990
This Wyler Vetta reference E3347W is a stainless steel wristwatch with stopwatch function, dated by the auction house to circa 1990. The case measures approximately 37 mm in diameter and houses an automatic movement with a lever escapement.
The black dial is styled with Arabic numerals, an outer tachymeter scale, and three contrasting silver-coloured subsidiary dials for small seconds, a 30-minute counter, and a 12-hour counter. Two round pump pushers flank the winding crown on the case side, and the watch is presented on a black leather strap with a stainless steel buckle clasp.
Evidence at a glance
- Linked sources
- 1
- Photograph views
- 1
- Catalogue references
- 0
Counts describe this entry’s documentation, not authenticity, rarity or completeness. Photographs may show one specimen; check each caption and licence.
Technical characteristics
- Date
- circa 1990
- Dial
- Black, Arabic numerals, silver-coloured sub-dials
- Type
- Chronograph
- Movement
- Automatic, lever escapement
- Reference
- E3347W
- Accessories
- Buckle clasp, stainless steel
- Place recorded
- Switzerland
- Maker / attribution
- Wyler Vetta
- Case material and size
- Stainless steel, diameter approx. 37 mm
Design
- Visible features
- • Black dial with three silver-coloured subsidiary dials positioned at 3, 6, and 9 o'clock • Outer tachymeter chapter ring and 'SWISS MADE' printed below 6 o'clock • Pump pushers located at 2 and 4 o'clock flanking a fluted winding crown • Mounted on a black textured leather strap
- Identity and Dating
- The timepiece is catalogued as a 'Wristwatch with stopwatch function', reference E3347W, by Wyler Vetta. The auction house dates the watch to circa 1990. Individual serial numbers and case back hallmarks are not recorded in the source text.
- Dial Display and Escapement
- The dial is described in the source as black with Arabic numerals and silver-coloured sub-dials for 30-minute and 12-hour counters, small seconds, and a tachymeter scale. Photographic inspection confirms three silver-coloured subsidiary dials at 3, 6, and 9 o'clock, along with an outer tachymeter chapter ring and 'SWISS MADE' printed below 6 o'clock. Internally, the cataloguing records an automatic movement with a lever escapement, though calibre specifics are not documented in the listing.
- Case and External Architecture
- The auction description documents a stainless steel case with a diameter of approximately 37 mm. Visible physical observations show two pump pushers at 2 and 4 o'clock flanking a fluted winding crown. The watch is mounted on a black textured leather strap. The auction cataloguing also notes a stainless steel buckle clasp, which is not shown in the primary photograph.
Identification
- Reference
- E3347W
- Source note
- Facts transcribed from the linked source listing or collection record. Attribution and specifications are source-reported and have not been independently authenticated.
Catalogue references
No catalogue numbers recorded. Numbers are only published once transcribed from a verified edition of a standard catalogue — they are never inferred.
Research required
- Research required: Movement and case back are not visible in the provided photograph
- Research required: Buckle clasp mentioned in the auction description is not shown in the image