Skip to content

Ring key, Gudea type 1.b

Also known as: Cheie cu inel, tipul Gudea 1.b

DocumentedSupported by at least one credible specialist source.

Record status

Individual type · partial

Ring key, Gudea type 1.b is held by National Museum of Transylvanian History. Museum description: Bronze ring key, Gudea type I.b, variant with the active part derived directly from the stem, subvariant with round teeth; made by casting; intact; the hoop is slightly deformed.

It has a large, circular hoop, rectangular in cross-section, undecorated. The body is quadrilateral. The solid, very short stem, positioned in continuation of the hoop, is decorated with a moulding at the upper part. The piece has 10 cylindrical teeth arranged in three rows: three in the upper row, three in the middle row, and another three in the lower row. The museum record gives material recorded as bronze; cast in a mould; The piece was produced by casting; measurements max = 0.6 cm; 3.5 cm, active part = 2.1 x 1.3 cm; 0.4 cm; outer d. of ring = 2 cm; inner d. of ring = 1.8 cm.

These details come from the holding museum's own record; how far this object represents a wider collectible type has not yet been independently verified.

Evidence at a glance

Linked sources
1
Photograph views
1
Catalogue references
0

Counts describe this entry’s documentation, not authenticity, rarity or completeness. Photographs may show one specimen; check each caption and licence.

Physical characteristics

Material
bronz; turnare în tipar; Piesa a fost realizată prin turnare
Dimensions
max = 0,6 cm; 3,5 cm, partea activă = 2,1 x 1,3 cm; 0,4 cm; d ext inel = 2 cm; d int. inel = 1,8 cm

Identification

Europeana id
/951/Culturalia_233b2256_d543_4e31_904a_230ed58102f1
Museum object name
Cheie cu inel, tipul Gudea 1.b
Holding institution
National Museum of Transylvanian History

Catalogue references

No catalogue numbers recorded. Numbers are only published once transcribed from a verified edition of a standard catalogue — they are never inferred.

Research required

  • Research required: confirm materials, dimensions, maker and wider type against the holding institution and a specialist reference.
Can you source one of these? Submit a reference