English brass lantern clock
Record status
Individual type · partial
Period
circa 1900
This lantern clock features an all-brass construction and stands at a height of 40 centimeters. The design incorporates structural elements such as brass pillars at the four corners, a domed bell mounted at the top, and decorative frets.
The clock rests on four ball feet. The circular dial includes an outer ring with Roman numerals and linear divisions, while the central area is engraved with floral scrollwork designs. A winding hole is visible on the dial, along with steel hands. The clock is powered by a fusee movement, intended to regulate spring force transmission. It includes a passing strike mechanism that activates a hammer on the bell. The rear and sides feature brass access doors, which reveal the pendulum and movement plates.
The brass housing exhibits a natural patina. The technical working condition of the timepiece is not specified in the provided records.
Evidence at a glance
- Linked sources
- 1
- Photograph views
- 1
- Catalogue references
- 0
Counts describe this entry’s documentation, not authenticity, rarity or completeness. Photographs may show one specimen; check each caption and licence.
Technical characteristics
- Date
- circa 1900
- Type
- Lantern clock
- Height
- 40 cm
- Strike type
- Passing strike
- Movement type
- Fusee
- Place recorded
- England
- Country of origin
- England
- Dial ornamentation
- Engraved floral scrolls
- Construction material
- Brass
Design
- Visible features
- • Brass case with four ball-shaped feet • Engraved foliate scroll patterns on the dial center • Domed bell positioned above decorative openwork frets • Single winding aperture on the dial
- Movement and Mechanism
- The timepiece is driven by a fusee movement, a system designed to regulate the power output of the mainspring. Access to the internal mechanism, including the movement plates and the pendulum, is provided through brass doors located on the rear and side of the case. The clock includes a passing strike mechanism. This system operates by using a hammer to strike the large brass bell mounted on top of the clock case. The state of the internal components, including the chain and gears, remains unverified according to the available documentation.
- Condition and Maintenance
- The exterior brass components show signs of age, characterized by a natural patina and surface markings. The provided records do not specify whether the clock has undergone historical servicing or if it is currently in functional order. Because of the age and nature of the mechanism, it is recommended that potential collectors have the movement inspected by a professional. Key areas for assessment include the condition of the fusee chain, the gear teeth, the pendulum suspension, and the integrity of the striking mechanism hammer and lever.
- Case and Dial Construction
- The clock is constructed entirely of brass and stands on four ball-shaped feet. The structure includes brass columns at the four corners that support the upper assembly. The top section houses the brass bell, which is protected by decorative brass frets featuring traditional scrollwork patterns. The circular dial is mounted on the front of the case. It features an outer chapter ring with Roman numerals and linear minute markers. The central portion of the dial is decorated with engraved foliate scroll designs. The dial is equipped with steel hands and includes a single winding hole. The overall height of the clock is 40 centimeters.
Identification
- Source note
- Facts transcribed from the linked source listing or collection record. Attribution and specifications are source-reported and have not been independently authenticated.
Catalogue references
No catalogue numbers recorded. Numbers are only published once transcribed from a verified edition of a standard catalogue — they are never inferred.
Research required
- Research required: Condition of the fusee chain or cord is unverified
- Research required: Technical working order and history of service are not documented