Heuer Super Autavia Mark I Dashboard Clock and Timer
Record status
Individual type · partial
Period
circa 1958
This Heuer Super Autavia Mark I is a dashboard-mounted chronograph and timer, specifically produced for the New York retailer Abercrombie & Fitch. Designed for installation in racing cars, rally vehicles, or aircraft, it functions as a timekeeping instrument capable of recording events for up to 12 hours.
The device measures 55 mm in diameter, featuring a bi-directional rotating bezel with a 12-hour scale, an acrylic crystal, and a large serrated winding crown at the 12 o'clock position. The matte black dial displays luminous markers, a 30-minute register at 12 o'clock, and a constant seconds sub-dial at 6 o'clock. It is housed on a square steel mounting plate and powered by a mechanical Valjoux 76 movement.
Evidence at a glance
- Linked sources
- 1
- Photograph views
- 1
- Catalogue references
- 0
Counts describe this entry’s documentation, not authenticity, rarity or completeness. Photographs may show one specimen; check each caption and licence.
Technical characteristics
- Type
- Dashboard clock
- Bezel
- 12-hour bi-directional
- Maker
- Heuer
- Model
- Super Autavia Mark I
- Movement
- Valjoux 76
- Retailer
- Abercrombie & Fitch
- Case diameter
- 55 mm
- Place recorded
- Switzerland
- Introduction year
- 1958
- Maker / attribution
- Heuer
Design
- Visible features
- • The dial features dual branding with 'Abercrombie & Fitch' printed above the center and 'Super Autavia' with the Heuer logo below • The mounting plate contains four holes at the corners for installation • The bezel features orange-colored numerals and a triangular marker • The watch is accompanied by a red and yellow presentation box
- Design and Configuration
- The Heuer Super Autavia Mark I is configured as a dashboard-mounted timekeeping instrument. It is constructed with a 55 mm diameter circular case set within a square steel base plate measuring approximately 2.5 by 2.5 inches. This assembly facilitates attachment to vehicles through four pre-drilled holes in the base. The timepiece incorporates a bi-directional rotating bezel with a 12-hour scale marked in orange. The dial is finished in matte black and features a layout designed for visibility and event timing. Key indicators include a constant seconds sub-dial at the 6 o'clock position and a 30-minute chronograph register at 12 o'clock.
- Historical Context and Condition
- The Super Autavia line was first introduced by Heuer in 1958. This specific specimen belongs to the Mark I series, which includes early production specifications for this instrument range. The piece is reported to be in near-new condition, displaying a uniform patina on the luminous indices and hands. The documentation provided notes that there is no available record of the technical service history for this instrument.
- Mechanical Movement and Operation
- The movement powering this dashboard instrument is a manual-wind mechanical chronograph caliber, specifically the Valjoux 76. The operation of the chronograph functions is managed through external controls integrated into the case structure. A large, serrated winding crown is positioned at the 12 o'clock mark, facilitating winding and time adjustment. Chronograph activation is controlled by a pusher, also located at the 12 o'clock position, while the reset function is managed by a separate pusher located at 1 o'clock.
Identification
- Source note
- Facts transcribed from the linked source listing or collection record. Attribution and specifications are source-reported and have not been independently authenticated.
Catalogue references
No catalogue numbers recorded. Numbers are only published once transcribed from a verified edition of a standard catalogue — they are never inferred.
Research required
- Research required: Historical provenance or specific vehicle history is not documented
- Research required: Internal technical service history is unknown