Skip to content

Bracket clock, Weeks, Thomas, England, 1780-1790

DocumentedSupported by at least one credible specialist source.

Record status

Individual type · partial

Period

1780-1790

Bracket clock, Weeks, Thomas, England, 1780-1790 is an object recorded by Victoria and Albert Museum, dated 1780-1790. The museum's brief description reads: Ebonised bracket clock, English, 1780-1790, movement made by Weeks. Museum description: Bracket clock. The ebonised oak case is inset with brass fillets and stands on a brass base with brass bracket feet, the whole surrmounted by a brass loop handle. An arched panel of brass scaly fret at each side and an arched pane of glass at the back. The enamelled hour dial is overset by three subsidiary dials, all incorporated into a brass field, the lower spandrels of which are decorated with baskets of flowers and the upper section consisting of honeysuckle ornament. The chime is of eight bells and the movement is by Weekes. The museum record gives material recorded as brass (alloy), glass; measurements Height 44 cm; Width 30.5 cm; Depth 22 cm; place associated: England; maker recorded: Weeks, Thomas. These details come from the holding museum's own record; how far this object represents a wider collectible type has not yet been independently verified.

Evidence at a glance

Linked sources
1
Photograph views
1
Catalogue references
0

Counts describe this entry’s documentation, not authenticity, rarity or completeness. Photographs may show one specimen; check each caption and licence.

Physical characteristics

Material
brass (alloy), glass
Dimensions
Height 44 cm; Width 30.5 cm; Depth 22 cm

Technical characteristics

Maker recorded
Weeks, Thomas
Place recorded
England

Identification

Museum object name
Bracket clock
Museum object number
W.100-1962
Museum system number
O372384

Catalogue references

No catalogue numbers recorded. Numbers are only published once transcribed from a verified edition of a standard catalogue — they are never inferred.

Research required

  • Research required: confirm materials, dimensions, maker and wider type against the holding institution and a specialist reference.
Can you source one of these? Submit a reference